Event dashboard

IPAD · DNP RX1/RX1HS

Set up printing for your booth iPad.

Majestic’s current printing routes are the Windows DNP Bridge and configured AirPrint. Choose the route for your event, test one physical sheet, and verify any strip cutting before guests arrive.

PRINT ROUTE GUIDE

Choose your booth hardware.

Select the iPad model below
ROUTE TO CONFIGURE AND TEST

Rehearse the Majestic DNP Bridge

For your M1 or newer iPad, Majestic’s current automatic route queues jobs to a Windows computer connected to the RX1/RX1HS. Configure the printer software and separate full-sheet and strip folders, then verify actual printing and cutting. Majestic direct USB printing is not implemented.

REHEARSAL REQUIRED
WINDOWS BRIDGE · PHYSICAL TEST REQUIRED

iPad + Windows DNP Bridge

Majestic queues completed photos for a Windows computer. The bridge copies each job to the configured print-software folder. That handoff does not confirm paper output or a center cut.

  • Queue automatically when enabled in the event
  • Separate full-sheet and 2×6 strip folders
  • Configure and test the printer software
  • Check existing output before retrying a job
Configure inside an event
AIRPRINT · CONFIGURED CONNECTION REQUIRED

iPad + AirPrint

Use a compatible AirPrint connection, such as DNP WCM Plus with a supported printer. Safari opens a print sheet. Native PrintLink can reuse the AirPrint printer selected in Operator.

  • Current native route submits full 4×6 images
  • Confirm your print server and printer compatibility
  • Current native route refuses center cutting
  • Verify paper size, orientation and actual output
DNP compatibility information
NOT IMPLEMENTED IN MAJESTIC

M1 iPad + direct USB

LumaBooth offers direct USB printing on supported M-series iPads. The current Majestic native app uses AirPrint and does not include a DNP USB printing implementation.

  • M1 hardware alone does not enable Majestic USB printing
  • Native printer integration still needs to be built
  • Automatic print and strip cutting need hardware tests
  • No Majestic direct USB calibration is available
LumaBooth direct USB documentation

PRINT CALIBRATION

Print one sheet, then inspect it.

These buttons use this device’s AirPrint route; they do not submit an event bridge job. Inspect the 4×6 paper, orientation and outside borders yourself. A browser strip sheet is a layout test and sends no cutter command. Test automatic strip cutting through your configured event bridge.

Run one 4×6 test and inspect the paper at the printer.
Browser AirPrint · physical output unconfirmed